Bobst Expertfoil 142 Autoplaten

Description

Ref: 9847. 2015 Bobst Expertfoil 142 Autoplaten

Only 2,500 hours worked!

Equipped with:

Helpline Plus system. Centerline system for quick job changeover. 

Electronic device for sheet travel control. 

Control cabinet cooling unit. 

Bobst-Electronic machine operating system CUBE3 (Control Unit Bobst Electronic) with colour touch screen. 

Manual non-stop Feeder device. 

Synchronization to control the arrival of the sheets at the front lays with a display on the C.U.B.E. screen -Adjustable while in operation: to fine tune the feeder cycle to the platen 

Feeder Plus system 

Covered with an anti-static stainless steel plate. Feed table inlet equipped with lateral ramps. 

Belt slow-down device ensuring smooth arrival of the sheets against the front lays. Front lays, adjustable in pairs with front register control. 

"Pull" guide (OS) adjustable according to Centerline marks, with side register control. Double sheet detector. 

Mechanical, integrated on pull guide (OS). 

Sheet hold-down device (guiding the sheets to the front lays). Upper frame with pneumatic lifting device. 

Upper transport equipment for paper and paperboard 

Transport belts - with lateral guidance and automatic tensioning system. 

Heated upper head. 

With 12 independent heating zones. 

Gripper reopening device. 

Automatic "on and off'' pressure device of the platen. Equipment centering and locking. 

Automatic locking of the chase against the upper beam. Measurement of the stamping force with strain gauge. 

Pile tray. 

Adjustable rear and side joggers with Centerline marks. Pivoting front joggers with quality control sampling function. Braking Brush. 

Automatic non-stop apron. 

Internal Foil Supply Module with 2 advance shafts for 350mm maximum diameter (D-350mm) foil reels consisting of 2 advance shafts, each driven by 2 individual electronically controlled motor. 

Honeycomb chase 

Stamping plate, "BM" concept 

Compensating plate, "BM" concept 

Steel supporting plate, thickness 21,8mm 

Graduated rule 

Convertible Stock:

Paper (depending on quality), min. 100 g/m2 

Board (depending on quality), up to ( * ) 2000 g/m2 

Corrugated board, (micro-flute) up to ( " ) 2.0 mm 

( * ) Carton acceptable warp : 4% of the widthwise sheet 

Sizes:

Sheet size, max. 1420 X 1020 mm 

Sheet size, min. 700 X 500 mm 

Stamping and embossing size, max. 1380 X 980 mm  - found on presscity.com