Duplo DC645 Slitter/Cutter/Greaser

Accessories

  • business card unit 54 x 5
  • Computer controll Job Creator 1.5
  • Feed capacity: 100mm
  • Greaser?
  • Output: 26 sheets/min (A4), 12 sheets/min (A3)
  • Paper size: min. 210x210mm, max. 370x650mm
  • Paper weight: 110-350g/qm
  • PC connection: USB
  • Perfo unit

Description

Can be seen in Denmark

D. DC-645 - Cutter/Creaser “Production Colour Finisher”

The DC-645 is a product created to perform the most commonly required finishing operations on digital colour prints. It performs cutting and creasing operations in one single pass, plus in addition it has the unique Duplo feature of being able to automatically adjust and compensate for image drift which is typical of most digital colour presses.

Options

Business card module
The DC-645 features six rotary slitters that can be programmed to move independently to the desired position to trim margin around the sheet, cut and form gutters between multiple pieces on the sheet. The waste falls into a bin inside the machine. Six slitters is sufficient for cutting (say) 25 business cards from a sheet of SRA3, but only when the design of card allows for a single cut between. There are alternative impositions that enable cutting of 18 cards from a sheet, but more commonly where more cards are imposed, or where very high levels of accuracy are required, then a dedicated module with ten slitters can process such sheets more accurately and efficiently. These are in the following sizes and slot into a position at the end of the machine:
•50mm
•50.8mm (2”)
•52mm
•54mm
•55mm

Perforator module
With this optional module, you can finish slit/cut/crease and now perforate in one pass. This further improves productivity and makes the DC-645 an even more attractive proposition. Like the Business Card Module, the unit fits into the option area of the DC-645 and is replaceable by the operator. This unit possesses two perforating wheels that automatically position themselves according to instructions in the job programme. The Perforation Module works with the image shift compensation using the Duplo register mark. When not being used, the tools retract out of the way of the sheet being processed, removing the need for the operator to fit and disconnect the module. Applications include tear-off vouchers and coupons; stubs for forms, pads and calendars; CD inlays. Form is fixed at 15 teeth per inch.

Rotary Score module
Creases are made across the sheet direction by a male and female matrix rule that crushes the fibres in a neat regular line. However; there are applications where the most efficient imposition is to place the items on the sheet where the fold line will be in the lengthways direction of movement of the sheet (such as 2 x A5 booklet covers, or greetings cards, or 3 x CD pages on a large sheet). This modules contains two This allows one sheet to be processed in a single pass instead of two passes that can triple production time. The unit possesses two pairs of wheels that automatically position themselves according to instructions in the job programme. The module works with the image shift compensation using the Duplo register mark. When not being used, the tools retract out of the way of the sheet being processed, removing the need for the operator to fit and disconnect the module.

Operator control stand
The DC-645 is delivered with software for running on PC or Mac that makes it easier for even untrained staff to programme the machine with new jobs, edit, load and save. Rather than utilise a nearby desk, a more user-friendly arrangement is to add this purpose-built stand which fits into the DC-645 and supports a computer, monitor, mouse & keyboard while occupying minimal floor space.

JDF connector
JDF stands for ‘Job Definition Format’. It is a standard developed by the CIP4 group of companies that describes every aspect of a print job in the form of an electronic ‘ticket’ from origination to finishing. The ticket is read by a device which then uses the information to set-up. To enable support for JDF, a product must have some form of computer with which to talk to other computers in the print shop over a network. Within this computer runs some software that is capable of:
•Reading the Job Ticket
•Translating the information
•Communicating the information in a way that the machine understands
Updating the Job Ticket to reflect the changes it has made to the job
Reporting with JMF

Duplo has developed the means for a computer to communicate with the DC-645, send set-up information and receive status information in return. This is called ‘Job Creator’, but ’Job Creator’ needs manual input to create the job, and the only reporting is internally within the programme and computer. To enable integration with JDF, Duplo has developed the “JDF Connector” software that will perform the functions above and enable an operator to:
•set-up the DC-645 with the latest, most accurate information
•Enable efficient short run production
•Manage the running of the DC-64
•Improve job turnaroundMReduce costs and waste
•Perform routine tasks faster
•Maintain production quality
•Close the information loop by providing a key step in the job audit trail
•Monitor job status and delivery schedules







  • Dealer:
  • Press Trading Denmark APS
  • Manufacturer:
  • Duplo
  • Model:
  • DC-645
  • Year:
  • 2007
  • Size:
  • 650 x 370 mm.
  • Location:
  • Denmark
  • Price:
  • Log in to see prices

Dealers

For sale in Egypt by:
Partner: Press Trading middle east
For sale in Denmark by:
Owner: Press Trading Denmark APS
Create Auto Search Agent

Spare Parts & Accessories

Complete set of coating rollers - (New)

image
Condition:
Copyright PressCity 2009-2016
Frontpage | Manufacturers | PressCity on Twitter | RSS | Machines by colors | Machines by units/stations | Spare parts | Terms & Conditions | Google+